O2 | Vodafone | Three | 4G EE
The WB – Pro Dual bands 1800/2100mhz is approved for use in the UK and most European States for the improvement of mobile phone signals coverage for 2G- voice, 3G- voice and data downloads, uploads and 4G Lite for EE (UK). Those on Vodafone/O2 networks and their Resellers like Tesco / lycra / giffgaff mobiles in the UK will enjoy the benefit of uninterrupted calls. And those looking to improve their 3G signals for both voice and data which relies on the 2100mhz frequency will also benefit from this Booster with improved signals coverage. The frequencies combination in this booster is what makes it stand out, and the Pro 2G,3G, AND 4G Lite have a wider coverage area of 500sqm2. The Pro Booster also comes with some new advanced digital features that enhance wider mobile signal coverage areas.
- ALL UK GSM VOICE CALLS
- ALL UK 3G VOICE AND DATA
- 500 SQUARE METERS COVERAGE AREA
- MGC – DIGITALLY CONTROLLED IN 1DB STEPS
- ALC & AGC – 0 TO 30 DB
- UPGRADED GAIN LEVEL 60/65DB
- RSSI SIGNAL STRENGTH INDICATOR
- OSCILLATION ALARM SUPPORTS
- 20~45 SIMULTANEOUS USERS
- DURABLE INDUSTRIAL DESIGN
- HIDDEN MOUNTING BRACKET
- CE 0700 APPROVED LEGAL TO USE
- 3 YEARS GUARANTEE
Setting Up Your Booster
Our Pro Dual bands 1800/2100mhz booster like every other of our boosters is quite easy to set up, it is basically a plug and play device. The package comes with a Signal Booster, Outdoor and Indoor antennas, 10 metres coax cable, a power supply and an easy to use instructions manual.If you are in an extremely weak signal location, you will need to purchase a stronger unit like the Super bands’ Booster or higher.
Before starting the installation, you will need to figure out a position in the roof where you can locate a good mobile signal, it doesn’t have to be full bar with our boosters 1-2 bars is enough for it to amplify and do the magic.
Once this location is figured out, position the Outdoor antenna if possible facing the general direction of the network mast. Do not point directly at this mast as it may cause interference and overload the booster.
Connect one end of the coax cable to the external antenna and the other end to the outdoor port of the booster. The position of the booster is entirely up to you we however recommend it should be secure inside the building with a minimum distance of 10 metre away from the outdoor antenna.
Once this is done, you then connect the indoor antenna to the mobile port on the Booster securely. Plug in the power supply cord and switch your booster on. You should begin to notice an increase in the bars on your mobile phone.
If the result you get is not what you anticipated please do not hesitate to give our Technical Team a call as we are here to help.
What’s Included In The Box
- 1 x WB Mini Dual bands Mobile booster
- 1 x Outdoor Panel Antenna
- 1 x 10-meter Coaxial Cable
- 1 x AC/DC Power Supply
- 1 x Indoor Antenna
- 1 x Easy to work Installation Manual
|Power||UL Max 20dBm
DL Max 19dBm
|Frequency||800MHz: UL 1710~1785MHz DL 1805~1880MHz
2100MHz: UL 1920~1990MHz DL 2110~2180MHz
|Ripple in Band||≦ 5dB|
|Spurious Emission||≦ -30dBm ~ -36dBm|
|Max Noise Figure||≦ 6dB|
|Return Loss||≦ 3dB|
|Time Delay||≦ 0.5μs|
|Power Supply||AC100~240V 50~60Hz / DC12V 2A (Included)|
|Power Consumption||< 10 Watt|
|Connector||N-Female as standard|
|Cooling||Heatsink convection cooling|
|Environment Conditions||IP 40|
|Operating Temperature||10°C – 60°C|